ACOM 1000 Specifications

	Frequency Coverage	All amateur bands 1.8–54MHz; extensions and/or changes on request.
	Power Output	1000W PEP or continuous carrier, no mode limit.
	Intermod Distortion	Better than 35dB below rated output.
	Hum and Noise	Better than 40dB below rated output.
	Harmonic Output Suppression	1.8–29.7MHz gives better than 50dB below rated output. 50–54MHz gives better than 66dB below rated output.
	Input and Output Impedances	Nominal Value: 50 Ohm unbalanced, UHF (SO239) type connectors. Input Circuit: Broadband, VSWR less than 1.3:1, 1.8–54MHz continuously (no tunings, no switching). Bypass path VSWR less than 1.1:1, 1.8–54MHz continuously. Output Matching Capability: better than VSWR 3:1 or greater at reduced output levels.
	RF Gain	12.5dB typically, frequency response less than 1dB (50 to 60W drive power for rated output).
	Primary Power	170–264V (200, 210, 220, 230 and 240V nominal taps, 100, 110 and 120V taps on request, 10% to 15% tolerance), 50–60Hz, single phase, 2000VA consumption at rated output.
	Compliance	Complies with CE safety and EMC requirements, as well as FCC regulations (6, 10 and 12m bands lock provided).
	Size and Weight	WxDxH = 422x355x182mm, 18kg.
	Operating Environments	Temperature Range: 0 to 50°C. Humidity: Up to 75% at 35°C. Altitude: Up to 3000m above sea level without output deterioration.