Harvest SPE Technical Information

The Harvest SPE is configured using a set of AT style commands that form an extension to the standard GPRS modem command set. The SPE Commands page documents these extended commands.

The Physical Characteristics page decribes the physical dimensions of the SPE as well as the connector types and pinouts.

If you are using one of our Diagnostic and Programming Adaptors in the diagnostic mode then the SPE will output messages indicating what it's doing. This can be quite helpful when the SPE doesn't appear to be working and you want to know why. The Debug Messages page provides some elaboration on the basic debug messages.

The SPE Flash Programming page describes how to use our Diagnostic and Programming Adaptors to update an SPEs flash firmware.